Kia Cee'd: Front Door / Front Door Module Repair procedures

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Front Door / Front Door Module Repair procedures

Replacement
1.
Remove the front door window glass.
(Refer to Front Door - "Front Door Window Glass")
2.
Remove the front door outside handle.
(Refer to Front Door - "Front Door Outside Handle")
3.
Disconnect the outside rear view mirror connector (A).

4.
Loosen the outside handle base mounting bolt (A).

5.
Loosen the front door latch (B) mounting screws.
6.
After loosening the mounting bolts, then remove the front door module (A).
Tightening torque :
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

7.
Disconnect the front door module mounting clip (B).
8.
Disconnect the connectors and front door module wiring harness (A).

9.
Install in the reverse order of removal.
  
The area of whole parts should be applied with sufficient grease.
Make sure connectors are connected properly and each rod is connected securely.
Make sure the door locks/unlocks and opens/closes properly.
Front Door Module Components and components location
Component Location   1. Front door module ...

Front Door Outside Handle Components and components location
Component Location   1. Front door outside handle ...

Other information:

Kia Cee'd JD Service Manual: Electronic Parking Brake (EPB) Repair procedures
Removal 1. Turn ignition OFF and disconnect the negative (-) battery cable. 2. Remove the floor console assembly. (Refer to Body - "Floor console assembly") 3. Disconnect the EPB cont ...

Kia Cee'd JD Owners Manual: Starting the diesel engine
To start the diesel engine when the engine is cold, it has to be pre-heated before starting the engine and then have to be warmed up before starting to drive. 1.Make sure the parking brake is applied. 2.Manual Transaxle - Depress the clutch pedal fully and shift the transaxle into Neut ...

© 2017-2024 www.kceed.com