Kia Cee'd: Front Door / Front Door Belt Inside Weatherstrip Repair procedures

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Front Door / Front Door Belt Inside Weatherstrip Repair procedures

Replacement

1.	Remove the front door trim. (Refer to Front Door - "Front Door Trim")

2.	Remove the front door belt inside weatherstrip (A).

Install in the reverse order of removal.

•	Replace any damaged clips.

Front Door Latch Repair procedures

Replacement 1. Remove the front door module. (Refer to Front Door - "Front Door Module") 2. Remove the front door out ...

Front Door Side Weatherstrip Repair procedures

Replacement 1. Detach the clips, then remove the front door side weatherstrip (A). 2. Install in the reverse order of removal ...

Other information:

Kia Cee'd JD Service Manual: Rail Pressure Sensor (RPS) Description and operation
Description Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor converts the pressure to voltage signal. By using this signal, the ECM ...

Kia Cee'd JD Service Manual: Troubleshooting
Troubleshooting Problem Symptoms Table Use the table below to help you find the cause of the problem. The numbers indicate the priority of the like cause of the problem. Check each part in order. If necessary, replace these parts. Symptom ...