Inspection |
1. |
Check the audio remote control switch (A) for resistance between terminals
in each switch position.
|
Replacement |
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the driver airbag module.
|
3. |
Remove the steering wheel.
(Refer to Electric Power Steering - "Steering Column and Shaft")
|
4. |
Disengage the steering wheel remote control switch assembly.
|
5. |
Remove the steering wheel remote control switch (A).
|
6. |
Install in the reverse order of removal.
|
Kia Cee'd JD Service Manual: Input Speed Sensor 1 Repair procedures
Inspection
Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor.
Removal
1.
Turn off the ignition switch and then disconnect the battery (-) cable.
2.
Remove the under cover.
3.
...
Kia Cee'd JD Service Manual: Alternator Specifications
Specification
Alternator [Non-ISG type]
Item
Specification
Rated voltage
13.5V, 90A
Speed in use
1,000 ~ 18,000 rpm
Voltage regulator
IC Regulator built-in typ ...