Kia Cee'd: Lighting control / Flashing headlights

Pull the lever towards you. It will return to the normal position when released. The headlight switch does not need to be on to use this flashing feature.

High - beam operation
1. Turn the light switch to the headlight position. 2. Push the lever away from you. The high-beam indicator will light when the headlight high beams are switched on. To prevent the b ...

High Beam Assist (HBA)
The high beam assist is a system that automatically adjusts headlamp range (switches between high beam and low beam) according to the brightness of other vehicles and road conditions. ...

Other information:

Kia Cee'd JD Service Manual: Gear Actuator Repair procedures
Removal 1. Turn off the ignition switch and then disconnect the battery (-) cable. 2. Remove the air cleaner assembly and air duct. (Refer to Engine Mechanical System - "Air cleaner") 3. ...

Kia Cee'd JD Service Manual: Troubleshooting
Basic Troubleshooting Basic Troubleshooting Guide Customer Problem Analysis Sheet Basic Inspection Procedure Measuring Condition of Electronic Parts' Resistance The measured resistance at high temperature after vehicle running may be high or lo ...

© 2017-2025 www.kceed.com