Kia Cee'd: Cylinder Block / External Damper Flywheel Components and components location

 

Components and components location

Components   1. Cylinder block 2. Ladder frame 3. Crankshaft 4. Crankshaft upper bearing 5. Crankshaft lower bearing 6. Thrust bearing 7. ...

External Damper Flywheel Repair procedures

Removal and installation 1. Remove the dual clutch transmission. (Refer to Dual Clutch Transmisson(DCT) - "Dual Clutch Transmisson Assembly") ...

Other information:

Kia Cee'd JD Owners Manual: To install the barrier net
1. Open the cover (if equipped) for the holder position (1) or (2) you want to install. 2. Compress the one side net upper shaft to length direction before insert the net upper shaft into the large hole (3) and then secure by sliding into the small hole (4). 3. Hang the net strap ...

Kia Cee'd JD Service Manual: Input Speed Sensor 2 Repair procedures
Inspection Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor. Removal 1. Turn off the ignition switch and then disconnect the battery (-) cable. 2. Remove the under cover. 3. ...