Kia Cee'd: Button Engine Start System / ESCL(Electronic Steering Column Lock) Repair procedures

Kia Cee'd JD Service Manual / Body Electrical System / Button Engine Start System / ESCL(Electronic Steering Column Lock) Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remoove the driver crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the steering column shroud upper and lower panel.
(Refer to Body - "Steering Column Shroud Panel")
4.
Disconnect the electronic steering column lock connector (A).

5.
Remove the electronic steering column lock after loosening shear bolts.
(Refer to Steering System - "Steering Column and Shaft")
Installation
1.
Install the electronic steering column lock (A).
  
Do not reuse the shear bolts.
When installing the new shear bolts to the electronic steering column lock, tighten the shear bolts until its head is cut off.
Tightening torque :
7 ~ 13 N.m (0.7 ~ 1.3 kgf.m, 5 ~ 9.4 lb.ft)

2.
Install the steering column.
3.
Install the crash pad lower panel and shroud panel.
ESCL(Electronic Steering Column Lock) Components and components location
Component ...

Ignition Switch Assembly
...

Other information:

Kia Cee'd JD Service Manual: Repair procedures
Replacement 1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. 2. Turn the steering wheel so that the front wheels can face straight ahead. 3. Remove t ...

Kia Cee'd JD Service Manual: Components and components location
Components Location   1. AVN (A/V & Navigation head unit) 2. Tweeter speaker 3. Antenna cable connector 4. Roof antenna (GPS+Radio) 5. Front door speaker 6. Rear door speaker 7. Antenna feeder cable 8. Rear camera ...

© 2017-2025 www.kceed.com