| Removal |
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the overhead console lamp.
(Refer to Lighting System - "Overhead Console Lamp")
|
| 3. |
Remove the eCall button (A) after loosening the mounting screws (B).
|
| Installation |
| 1. |
Install the eCall button.
|
| 2. |
Install the overhead console lamp after connecting the connector.
|
| 3. |
Connect the negative (-) battery terminal.
|
: Hybrid Electric Vehicle Information – Troubleshooting
Hybrid Electric Vehicle Information – Warning Lamps
It illuminates if your vehicle
has
an electrical component fault or
failure that causes your vehicle
to shutdown or enter a limited operating
mode. A message may appear in the
instrument cluster display.
Hybrid Electric Vehicle Information ...
Kia Cee'd JD Service Manual: Rear Cross Member Repair procedures
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the rear wheel and tire (A) from rear hub.
Tightening torque:
88.2 ~ 1 ...