Kia Cee'd: Inside rearview mirror / Electric chromic mirror (ECM)
The electric rearview mirror automatically controls the glare from the headlights of the car behind you in nighttime or low light driving conditions. The sensor mounted in the mirror senses the light level around the vehicle, and automatically controls the headlight glare from vehicles behind you.
When the engine is running, the glare is automatically controlled by the sensor mounted in the rearview mirror.
Whenever the shift lever is shifted into R (Reverse), the mirror will automatically go to the brightest setting in order to improve the drivers view behind the vehicle.
CAUTION
When cleaning the mirror, use a paper towel or similar material dampened with glass cleaner. Do not spray glass cleaner directly on the mirror as that may cause the liquid cleaner to enter the mirror housing.
To operate the electric rearview mirror:
- Press the on/off button (1) to turn the automatic dimming function on. The mirror indicator light will illuminate. Press the on/off button to turn the automatic dimming function off. The mirror indicator light will turn off.
- The mirror defaults to the ON position whenever the ignition switch is turned on.
Day/night rearview mirror
Make this adjustment before you start
driving and while the day/night lever is in
the day position.
Pull the day/night lever toward you to
reduce glare from the headlights of vehicles
behin ...
Outside rearview mirror
Be sure to adjust mirror angles before
driving.
Your vehicle is equipped with both lefthand
and right-hand outside rearview
mirrors. The mirrors can be adjusted
remotely with the remote switc ...
Other information:
Kia Cee'd JD Owners Manual: Steering wheel audio controls
The steering wheel may incorporate
audio control buttons.
CAUTION
Do not operate audio remote
control buttons simultaneously.
VOLUME (+/-) (1)
Press the lever upward (+) to
increase the volume.
Press the lever downward (-) to
decrease the volume.
SEEK/PRESET (/)
(2)
The SE ...
Kia Cee'd JD Service Manual: Adaptive Front Lighting System Repair procedures
Removal
AFLS Unit
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housing.
(Refer to Body - "Glove Box Housing")
3.
Remove the AFLS unti (A) after removing c ...
