Kia Cee'd: Driver position memory system / Easy access function
The system will move the driver's seat automatically as follows:
- Without smart key system
- It will move the driver’s seat rearward when the ignition key is removed and front driver’s door is opened.
- It will move the driver’s seat forward when the ignition key is inserted. - With smart key system
- It will move the driver’s seat rearward when the engine start/stop button is changed to the OFF position and front driver’s door is opened.
- It will move the driver’s seat forward when the engine start/stop button is changed to the ACC or START position.
You can activate or deactivate this feature. Refer to "User settings" in section 4.
Storing positions into memory using
the buttons on the door
Storing driver’s seat positions
1. Shift the shift lever into P or N (for
Automatic transaxle) or Neutral (for
manual transaxle) while the engine
start/stop button is ON or ignition
switch ...
Headrest
The driver's and front passenger's seats
are equipped with a headrest for the
occupant's safety and comfort.
The headrest not only provides comfort
for the driver and front passenger, but
a ...
Other information:
Kia Cee'd JD Service Manual: Repair procedures
Inspection
Signal Circuit Inspection
1.
Check clutch switch pull-up voltage
(1)
IG KEY "OFF", ENGINE "OFF".
(2)
Disconnect clutch switch connector.
...
Kia Cee'd JD Service Manual: Engine Control Module (ECM) Repair procedures
Removal
When replacing the ECM, the vehicle equipped with the immobilizer must
be performed procedure as below.
[In the case of installing used ECM]
1) Perform "ECM Neutral mode" ...
