Kia Cee'd: Interior Trim / Door Scuff Trim Repair procedures
| • |
Put on gloves to protect your hands.
|
|
| • |
Use a plastic panel removal tool to remove interior trim pieces
to protect from marring the surface.
|
| • |
Take care not to bend or scratch the trim and panels.
|
|
| 1. |
Using a screwdriver or remover, remove the front door scuff tirm (A).
[Front]
|
| 2. |
Pull out the rear seat cushion (A).
|
| 3. |
After loosening the mounting screws, then remove the rear door scuff
trim (A).
[Rear]
|
| 4. |
Install in the reverse order of removal.
| •
|
Make sure the connector are connected in properly.
|
| •
|
Replace any damaged clips.
|
|
|
[3Door]
| • |
Use a plastic panel removal tool to remove interior trim pieces
to protect from marring the surface.
|
| • |
Take care not to bend or scratch the trim and panels.
|
| • |
Put on gloves to protect your hands.
|
|
| 1. |
Using a screwdriver or remover, remove the front door scuff tirm (A).
[Front]
|
| 2. |
Install in the reverse order of removal.
| •
|
Replace any damaged clips.
|
|
|
Component Location
[5Door]
1. Front door scuff trim
2. Rear door scuff trim
[3Door]
1. Front door ...
Component Location
1. Cowl side trim
...
Other information:
Kia Cee'd JD Service Manual: Input Speed Sensor 1 Description and operation
Description
The input shaft speed sensor is important in that it detects the input shaft
RPM and sends this information to the Transmission Control Module (TCM).
It provides important input information for electric control.
The information is needed in all operations, i ...
Kia Cee'd JD Owners Manual: Jack and tools
The jack, jack handle, wheel lug nut
wrench are stored in the luggage
compartment.
Pull up the luggage box cover to
reach this equipment.
(1) Jack handle
(2) Jack
(3) Wheel lug nut wrench
Jacking instructions
The jack is provided for emergency
tire changing only.
To prevent the jack ...
Door Scuff Trim Components and components location
Cowl Side Trim Components and components location