If the smart key does not operate normally, you can lock or unlock the doors by using the mechanical key.
1.Press and hold the release button (1) and remove the mechanical key (2).
2.Insert the key into the hole of the outside door handle. Turn the key toward the rear of the vehicle to unlock and toward the front of the vehicle to lock.
3. To reinstall the mechanical key, put the key into the hole and push it until a click sound is heard.
Kia Cee'd JD Service Manual: EPB Switch Repair procedures
Remove
1.
Turn ignition OFF and disconnect the negative (-) battery cable.
2.
Remove the floor console upper cover.
(Refer to Body - "Floor console assembly")
3.
Remove the EPB switch ...
Kia Cee'd JD Service Manual: Crankshaft Position Sensor (CKPS) Description and operation
Description
Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one
of the most important sensors of the engine control system. If there is no CKPS
signal input, the engine may stop because of CKPS signal missing.
This sensor is installed in ladder fra ...