Kia Cee'd: Setup / Display Settings
Adjusting the Brightness
Press the 
key Select
[Display] Select [Brightness]
Use the 
,
buttons to adjust the
screen brightness or set the
Brightness on Automatic, Day, or
Night mode.
Press the 
button to reset.
(1) Automatic : Adjusts the brightness automatically
(2) Day : Always maintains the brightness on high
(3) Night : Always maintains the brightness on low
Pop-up Mode
Press the key Select
[Display] Select [Pop-up Mode]
This feature is used to display the Pop-up Mode screen when entering radio and media modes.
When this feature is turned on,
pressing the 
or
key
will display the Pop-up Mode screen.
✽ NOTICE
The media Pop-up Mode screen can be displayed only when two or more media modes have been connected.
Scroll Text
Press the key Select
[Display] Select [Scroll text]
This feature is used to scroll text displayed on the screen when it is too long to be displayed at once.
When turned on, the text is repeatedly scrolled. When turned off, the text is scrolled just once.
MP3 Information Display
Press the key Select
[Display] Select [Song Info]
This feature is used to change the information displayed within USB and MP3 CD modes.
(1) Folder File : Displays file name and folder name
(2) Album Artist Song : Displays album name/artist name/song
Starting Mode
Press the key to display the
Setup screen.
You can select and control options
related to [Display], [Sound],
[Phone] and [System]. ...
Sound Settings
Audio Settings
Press the key Select
[Sound] Select [Audio Settings]
Use the ,
,
,
buttons to
adjust the Fader/Balance settings.
Use the , buttons to adjust the
Bass/Middle/Treble se ...
Other information:
Kia Cee'd JD Owners Manual: Trip computer
The trip computer is a microcomputercontrolled
driver information system that
displays information related to driving
when the ignition switch is in the ON
position. All stored driving information
(except odometer, distance to empty and
instant fuel economy) resets if the battery
is ...
Kia Cee'd JD Service Manual: Repair procedures
General Inspection
After or before servicing the EPS system, perform the troubleshooting and test
procedure as follows. Compare the system condition with normal condition in
the table below and if abnormal symptom is detected, perform necessary remedy
and inspection.
&nb ...
