Kia Cee'd: Exhaust Emission Control System / Description and operation
Exhaust emissions (CO, HC, NOx) are controlled by a combination of engine modifications
and the addition of special control components.
Modifications to the combustion chamber, intake manifold, camshaft and ignition
system form the basic control system.
These items have been integrated into a highly effective system which controls
exhaust emissions while maintaining good drivability and fuel economy.
Air/Fuel Mixture Control System [Multiport Fuel Injection (MFI) System]
The MFI system uses signals from the heated oxygen sensor to activate and control
the injector installed in the manifold for each cylinder, thus precisely regulating
the air/fuel mixture ratio and reducing emissions.
This in turn allows the engine to produce exhaust gas of the proper composition
to permit the use of a three way catalyst. The three way catalyst is designed
to convert the three pollutants [hydrocarbons (HC), carbon monoxide (CO), and
oxides of nitrogen (NOx)] into harmless substances. There are two operating
modes in the MFI system.
1. |
Open Loop air/fuel ratio is controlled by information pre-programmed
into the ECM.
|
2. |
Closed Loop air/fuel ratio is constantly adjusted by the ECM based on
information supplied by the oxygen sensor.
|
Description
The catalytic converter of the gasoline engine is a three way catalyst. It oxidizes
carbon monoxide and hydrocarbons (HC), and separates oxygen from the oxides
of nit ...
Other information:
Ford Escape 2020-2022 Owners Manual: Steering
Electric Power Steering
Electric Power Steering Precautions
WARNING: The electric power
steering system has diagnostic checks
that continuously monitor the system. If
a fault is detected, a message displays
in the information display. Stop your
vehicle as soon as it is safe to do so.
Switch th ...
Kia Cee'd JD Owners Manual: Air conditioning
Kia Air Conditioning Systems are filled
with environmentally friendly refrigerant*.
1. Start the engine. Push the air conditioning
button.
2. Set the mode to the position.
3. Set the air intake control to the outside
air or recirculated air position.
4. Adjust the fan speed control and te ...