| Description |
Never attempt to measure the circuit resistance of the Seat Belt Pretensioner
(BPT) even if you are using the specified tester. If the circuit resistance
is measured with a tester, the pretensioner will be ignited accidentally.
This will result in serious personal injury.
|
Components and components location: Second Stage: Checking the tire pressure with the inflator kit
WARNING: If the tire does not
inflate to the recommended tire pressure
within 15 minutes, stop and call roadside
assistance.
WARNING: The power plug may
get hot after use and should be handled
carefully when unplugging.
Check the air pressure of your tires as
follows:
Remove the valve cap f ...
Kia Cee'd JD Service Manual: Rear Mud Guard Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with protective
tape, and apply protective tape around the related parts, to
prevent damage.
...