Kia Cee'd: Engine Mechanical System / Cylinder Head Assembly
- Components and components location
- Valve clearance adjustment
- Cylinder Head Cover Components and components location
- Cylinder Head Cover Repair procedures
- CVVT & Camshaft Components and components location
- CVVT & Camshaft Description and operation
- CVVT & Camshaft Repair procedures
- Camshaft Components and components location
- Camshaft Repair procedures
- Cylinder Head Components and components location
- Cylinder Head Repair procedures
Timing Chain Repair procedures
Removal
1.
Turn the crankshaft pulley clockwise, and align its groove with the
timing mark of the timing chain cover.
2.
Re ...
Components and components location
Components
1. Cylinder head cover
2. Cylinder head cover gasket
3. Cylinder head assembly
4. Cylinder head gasket
5. Camshaft position sensor
...
Other information:
Kia Cee'd JD Service Manual: Rear Wheel Speed Sensor Repair procedures
Removal
1.
Remove the rear wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Remove the rear wheel speed sensor mounting bolt (A).
...
: Locating the Safety Compliance Certification Labels. What Is the Gross Axle Weight Rating. What Is the Gross Vehicle Weight Rating. What Is the Gross Combined Weight Rating
Locating the Safety Compliance Certification Labels
Safety Compliance Certification Label
Example:
The Safety Compliance Certification label
is located on the door hinge pillar,
door-latch post, or the door edge that
meets the door-latch post, next to the
driver seating position.
What Is the G ...
