Removal |
1. |
Disconnect the battery (-) terminal.
|
2. |
Remove the air-bag module from the steering wheel.
(Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")
|
3. |
Remove the steering wheel.
(Refer to Steering System - "Steering Wheel")
|
4. |
Remove the steering wheel cover (A) after loosening the screws.
|
5. |
Disconnect the cruise control switch connector (A).
|
6. |
Remove the cruise control switch (A) after unfastening the screws.
|
Installation |
1. |
Install in the reverse order of removal.
|
Inspection |
Measuring Resistance |
1. |
Disconnect the cruise control switch connector from the control switch.
|
2. |
Measure resistance between terminals on the control switch when each
function switch is ON (switch is pressed).
|
3. |
If not within specification, replace switch.
|
Kia Cee'd JD Service Manual: Description and operation
Warning Lamp Activation
Warning Lamp Behavior after Ignition
On
As soon as the operating voltage is applied to the SRSCM ignition input, the
SRSCM activates the warning lamp for a LED lamp check.
The lamp shall turn on for 6 seconds during the initialization ...
Kia Cee'd JD Owners Manual: Additional safety precautions
Never let passengers ride in the
cargo area or on top of a foldeddown
back seat. All occupants should
sit upright, fully back in their seats with
their seat belts on and their feet on the
floor.
Passengers should not move out of
or change seats while the vehicle is
moving. ...