Kia Cee'd: Crash Pad / Crash Pad Lower Panel Repair procedures
| • |
When prying with a flat-tip screwdriver, wrap it with protective
tape, and apply protective tape around the related parts, to
prevent damage.
|
| • |
Put on gloves to protect your hands.
|
|
| • |
Take care not to scratch the body surface.
|
|
| 1. |
Using a screwdriver or remover, remove the crash pad side cover [LH]
(A).
|
| 2. |
After loosening the mounting screws, then remove the crash pad lower
panel (A).
|
| 3. |
Disconnect the diagnosis connector (A) and crash pad lower switch connector
(B).
|
| 4. |
Install in the reverse order of removal.
| •
|
Make sure the connector are connected in properly.
|
| •
|
Replace any damaged clips.
|
|
|
Replacement
•
When prying with a flat-tip screwdriver, wrap it with protective
...
Component Location
1. Glove box housing
...
Other information:
Kia Cee'd JD Service Manual: Repair procedures
General Inspection
After or before servicing the EPS system, perform the troubleshooting and test
procedure as follows. Compare the system condition with normal condition in
the table below and if abnormal symptom is detected, perform necessary remedy
and inspection.
&nb ...
Kia Cee'd JD Service Manual: Specifications
Specifications
Items
Specification
Rated voltage
DC 12V
Operating voltage
9V ~ 16V
Operating speed
30㎞/h ~ 250㎞/h
Sensible distance
...
Crash Pad Lower Panel Repair procedures
Glove Box Housing Components and components location