Kia Cee'd: Engine Control System / Crankshaft Position Sensor (CKPS) Specifications

Kia Cee'd JD Service Manual / Fuel System / Engine Control System / Crankshaft Position Sensor (CKPS) Specifications

Specification
 
Item
Specification
Coil Resistance (Ω)
774 ~ 946 [20°C (68°F)]

Crankshaft Position Sensor (CKPS) Description and operation
Description Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal in ...

Crankshaft Position Sensor (CKPS) Troubleshooting
Signal Waveform [NON-ISG] This example shows a typical Crankshaft Position Sensor(CkPS) and Camshaft Position Sensor(CMPS) waveform at idle.The PCM controls the ...

Other information:

Kia Cee'd JD Service Manual: Fuel Filler Door Release Actuator Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Open the tailgate and then remove the luggage side trim. (Refer to Body - "Luggage Side Trim") 3. Disconnect the fuel filler d ...

Kia Cee'd JD Owners Manual: Starting the diesel engine
To start the diesel engine when the engine is cold, it has to be pre-heated before starting the engine and then have to be warmed up before starting to drive. 1.Make sure the parking brake is applied. 2.Manual Transaxle - Depress the clutch pedal fully and shift the transaxle into Neut ...

© 2017-2024 www.kceed.com