| Component Location |

| 1. Quarter fixed glass |
Repair procedures: Inspecting the Tire for Wear. Inspecting the Tire for Damage
Inspecting the Tire for Wear
When the tread is worn down to
one sixteenth of an inch (2 mm),
tires must be replaced to help
prevent your vehicle from skidding
and hydroplaning. Built-in
treadwear indicators, or wear bars,
which look like narrow strips of
smooth rubber across the tread
will ...
: Switching Pre-Collision Assist On and Off
You cannot switch the system off.
Adjusting the Pre-Collision Assist Settings
You can adjust the following settings by
using the touchscreen controls in the
pre-collision assist menu:
Change alert and distance alert
sensitivity to one of three possible
settings.
Switch distance indication a ...