Kia Cee'd: Clutch System / Clutch Switch

Repair procedures
Removal 1. Remove the transaxle assembly. G 1.6 MPI (Refer to Manual Transaxle System - " Manual Transaxle") G 1.4 MPI (Refer to Manual ...

Description and operation
Description Clutch switch is connected to clutch pedal and transmits clutch operating state to ECM. When clutch pedal is depressed during driving, engine load changes from load ...

Other information:

: Second Stage: Checking the tire pressure with the inflator kit
WARNING: If the tire does not inflate to the recommended tire pressure within 15 minutes, stop and call roadside assistance. WARNING: The power plug may get hot after use and should be handled carefully when unplugging. Check the air pressure of your tires as follows: Remove the valve cap f ...

: Locating the Pre-Collision Assist Sensors
Camera. Radar sensor (if equipped). If a message regarding a blocked sensor or camera appears in the information display, something is obstructing the radar signals or camera images. The radar sensor is behind the fascia cover in the center of the lower grille. With a blocked sensor or ca ...

© 2017-2026 www.kceed.com