Kia Cee'd: Troubleshooting / Cluster Ionizer Repair procedures

Inspection
1.
Press the VENT switch more then 4 times within 2 seconds while pressing the OFF switch.
 
Display
Fail description
00
Normal
50
Cluster ion generator fault

* For diagnostic procedure, refer to DTC guide.
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housing.
(Refer to Body - "Glove Box Housing")
3.
Remove the shower duct (A).

4.
Disconnect the connector and then remove the cluster ionizer (B) after loosening the mounting screws.

5.
Install in the reverse order of removal.
Cluster Ionizer Description and operation
Description The cluster ionizer makes disinfection and decomposition of bad smell from the air-conditioner or inflow air. And it cleans the inside air of a vehicle. When runni ...

Heater
...

Other information:

Kia Cee'd JD Service Manual: ISG (Idle Stop & Go) Schematic diagrams
Schematic Diagram   1. C-CAN High/Low 2. MIL. Lamp 3. Immobilizer 4. Canister 5. Manifold Absolute Pressure Sensor (MAPS) 6. Intake Air Temperature Sensor (IATS) 7. Engine Coolant Temperature Sensor (ECTS) 8. Throttle Position Sensor (T ...

Kia Cee'd JD Service Manual: Manual Transaxle Components and components location
Components   1. Manual transaxle assembly 2. Manual transaxle support bracket 3. Clutch release bearing 4. Clutch release fork 5. Control cable bracket 6. Control shaft complete 7. Clutch tube bracket 8. Clutch release cylinder ...

© 2017-2026 www.kceed.com