Kia Cee'd: Troubleshooting / Cluster Ionizer Description and operation

The cluster ionizer makes disinfection and decomposition of bad smell from the air-conditioner or inflow air. And it cleans the inside air of a vehicle.

When running an air-conditioner or heater, it starts with "CLEAN" mode and repeats from "CLEAN" mode to "ION" mode and from "ION" mode to "CLEAN" mode every 15 minutes.

In the “CLEAN” mode, the cluster ionizer generates negative ions and positive ions and makes disinfection and decomposition of bad smell from the air-conditioner or inflow air.

It has an operation indicator lamp on the display area and shows whether it is operating or not.

In the “ION” mode, the cluster ionizer generates negative ions and cleans the inside air of a vehicle. It has an operation indicator lamp on the display area and shows whether it is operating or not.

Auto Defogging Sensor Repair procedures

Inspection To inspect and diagnose the sensor, refer to Self-Diagnosis procedure and DTC guide. Replacement 1. Disconnect the negative (-) battery ...

Cluster Ionizer Repair procedures

Inspection 1. Press the VENT switch more then 4 times within 2 seconds while pressing the OFF switch.   Display F ...

Other information:

Kia Cee'd JD Service Manual: Rail Pressure Sensor (RPS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed.   Condition Output Voltage (V) ...

Kia Cee'd JD Owners Manual: Door lock/unlock in an emergency situation
If the smart key does not operate normally, you can lock or unlock the doors by using the mechanical key. 1.Press and hold the release button (1) and remove the mechanical key (2). 2.Insert the key into the hole of the outside door handle. Turn the key toward the rear of the vehicle to ...