Kia Cee'd: Evaporative Emission Control System / Canister Repair procedures

Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the fuel tank assembly.
(Refer to Fuel System - "Fuel Tank")
3.
Disconnect the vapor hoses (A) and ventilation hose (B).
4.
Remove the canister (C) after removing the mouting bolts (D) and nut (E).

5.
Remove the canister protector after remove the bolt (A).

Inspection
1.
Check for the following items visually.
Cracks or leakage of the canister
Loose connection, distortion, or damage of the vapor hose/tube

A: Canister ↔ Atomosphere
B: Canister ↔ Fuel tank
C: Canister ↔ Intake manifold
Installation
1.
Installation is reverse of removal.
Canister protector installation bolt:
3.5 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
Repair procedures
Inspection [System Inspection] 1. Disconnect the vapor hose from the throttle body and connect a vacuum pump to the nipple on the throttle body. ...

Fuel Filler Cap Description and operation
Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel f ...

Other information:

Kia Cee'd JD Service Manual: Rain Sensor Repair procedures
Inspection Rain Sensing Wiper 1. In IGN2 ON state, if auto switch input (LIN communication) is ON then both wiper low relay and wiper high relay outputs are controlled by the rain sensor input signal. 2. If the wiper switc ...

Kia Cee'd JD Owners Manual: Auto defogging system (Only for automatic climate control system)
Auto defogging reduces the possibility of fogging up the inside of the windshield by automatically sensing the moisture of inside the windshield. The auto defogging system operates when the climate control system is on. ✽ NOTICE The auto defogging system may not operate normally, wh ...

© 2017-2023 www.kceed.com