Kia Cee'd: Exterior care / Bright-metal maintenance
- To remove road tar and insects, use a tar remover, not a scraper or other sharp object.
- To protect the surfaces of bright-metal parts from corrosion, apply a coating of wax or chrome preservative and rub to a high luster.
- During winter weather or in coastal areas, cover the bright metal parts with a heavier coating of wax or preservative. If necessary, coat the parts with non-corrosive petroleum jelly or other protective compound.
Finish damage repair
Deep scratches or stone chips in the
painted surface must be repaired
promptly. Exposed metal will quickly rust
and may develop into a major repair
expense.
✽ NOTICE
If your vehicle is dam ...
Underbody maintenance
Corrosive materials used for ice and
snow removal and dust control may collect
on the underbody. If these materials
are not removed, accelerated rusting can
occur on underbody parts such as th ...
Other information:
: How Does Blind Spot Information System Work. Blind Spot Information System Precautions. Blind Spot Information System Limitations
How Does Blind Spot Information System Work
Blind spot information system uses
sensors on both sides of your vehicle,
detecting rearward from the exterior
mirrors to approximately 13 ft (4 m)
beyond the rear bumper. The detection
area extends to approximately 59 ft (18 m)
beyond the rear bumpe ...
Kia Cee'd JD Service Manual: Repair procedures
Inspection
Signal Circuit Inspection
1.
Check ignition lock switch pull-up voltage
(1)
IG KEY "OFF", ENGINE "OFF".
(2)
Disconnect ignition lock switch connector ...
