Kia Cee'd: Lighting control / Auto light/AFLS position
When the light switch is in the AUTO light position, the taillights and headlights will be turned ON or OFF automatically depending on the amount of light outside the vehicle.
If your vehicle is equipped with the adaptive front lighting system (AFLS), it will also operate when the headlamp is ON.
CAUTION
- Never place anything over the sensor (1) located on the instrument panel, this will ensure better auto-light system control.
- Do not clean the sensor using a window cleaner, the cleaner may leave a light film which could interfere with sensor operation.
- If your vehicle has window tint or other types of coating on the front windshield, the Auto light system may not work properly.
Headlight position
When the light switch is in the headlight
position the head, tail, position, license
and instrument panel lights are ON.
✽ NOTICE
The ignition switch must be in the ON
position to turn o ...
High - beam operation
1. Turn the light switch to the headlight
position.
2. Push the lever away from you.
The high-beam indicator will light when
the headlight high beams are switched
on.
To prevent the b ...
Other information:
Kia Cee'd JD Service Manual: Starter Components and components location
Components
1. Screw
2. Front housing
3. Stop ring
4. Stopper
5. Overunn clutch
6. Lever
7. Lever plate
8. Lever packing
9. Magnet switch assembly
10. Armature
assembly
11. Yoke assembly
12. Brush (-)
13. Bru ...
Kia Cee'd JD Owners Manual: User Settings
In this mode there are 3 kinds of the submenu.
WARNING
Do not adjust the User Setting
while driving. You may lose your
steering control and cause severe
personal injury or accidents.
1. Stop the vehicle with the ignition
switch in the ON position or engine
running.
2. Press the ▲ ...
