Kia Cee'd: Troubleshooting / Auto Defogging Sensor Description and operation

The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog by controlling the intake actuator, A/C, auto defogging actuator, blower motor rpm, mode actuator.

Ambient Temperature Sensor Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the ambient temperature sensor. 3. Check the re ...

Auto Defogging Sensor Repair procedures

Inspection To inspect and diagnose the sensor, refer to Self-Diagnosis procedure and DTC guide. Replacement 1. Disconnect the negative (-) battery ...

Other information:

Kia Cee'd JD Owners Manual: VSM operation
When the VSM is operating: ESC (Electronic Stability Control) () light will blink. The steering wheel may be controlled. When the vehicle stability management is operating properly, you can feel a slight pulsation in the vehicle. This is only the effect of brake control and indi ...

Kia Cee'd JD Owners Manual: Parking brake & brake fluid warning
Parking brake warning This light illuminates when the parking brake is applied with the ignition switch in the START or ON position. The warning light should go off when the parking brake is released. Low brake fluid level warning If the warning light remains on, it may indicate that ...