(1) (EJECT)
Ejects the disc.
(2)
Converts to Radio(FM/AM) mode.
Each time the key is pressed, the mode is changed in order of FM1 ➟ FM2 ➟ FMA ➟ AM ➟ AMA.
(3)
Converts to Phone mode
❈ When a phone is not connected, the connection screen is displayed.
(4)
Start Media mode
Each time the key is pressed, the mode is changed in order of CD, USB(iPod®) AUX, My Music, BT Audio.
(5) POWER/VOL knob
Power : Press to turn power
on/off.
Volume : Turn left / right to
control
volume.
(6)
When pressed shortly (under 0.8 seconds)
- Radio mode : plays previous / next
frequency.
- Media (CD / USB / iPod® / My Music
/BT Audio) modes : changes the
track, Song(file)
When pressed and held (0.8 seconds)
- Radio mode : continuously changes
the frequency. Upon release, plays
the current frequency.
- Media(CD / USB / iPod® / My
Music) modes : rewinds or fast forwards
the track or file
- During a Handsfree call, controls
the call volume.
(7)
• Each time the button is shortly pressed (under 0.8 seconds), sets Screen Off ➟ Screen On ➟ Screen Off
❈ Audio operation is maintained and only the screen will be turned Off. In the Screen Off state, press any key to turn the Screen On again.
(8)
Set TA(Traffic Announcement) feature On/Off.
(9)
Converts to Setup mode.
(10)
❈ Press and holding the key again to continue listening to the current song (file).
(11) TUNE knob
- Radio mode : turn to change
broadcast frequencies.
- Media (CD / USB / iPod® / My
Music) modes : turn to search
tracks/channels/files.
(12)
MP3 CD / USB mode : Folder Search
❈ May differ depending on the selected audio.
Kia Cee'd JD Owners Manual: ESC operation off
ESC OFF state
This car has 2 kinds of ESC off
states.
If the engine stops when ESC is
off, ESC remains off. Upon
restarting the engine, the ESC
will automatically turn on again.
• ESC off state 1
To cancel ESC operation, press the ESC
OFF button shortly (ESC OFF indicator
light ...
Kia Cee'd JD Service Manual: Variable Intake Solenoid (VIS) Valve Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the VIS valve connector.
3.
Measure resistance between VIS valve terminals 1 and 2.
Specification: Refer to "Speci ...