Kia Cee'd: Troubleshooting / Ambient Temperature Sensor Description and operation

The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.

The sensor output will be used for discharge temperature control, temperature regulation door control, blower motor level control, mix mode control and in-car humidity control.

Photo Sensor Repair procedures

Inspection 1. Turn the ignition switch ON. 2. Connect the GDS. 3. Emit intensive light toward the photo s ...

Ambient Temperature Sensor Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the ambient temperature sensor. 3. Check the re ...

Other information:

Kia Cee'd JD Owners Manual: Build in segmentation bar
Put both pillars (A) from the segmentation bar in the openings from the rail. To move the segmentation bar, put your hand on the side of the pillar and push down the lever arm (B). Make sure the pillars click into place. To release the belt, turn the upper element (C) to the lef ...

: Adaptive Cruise Control – Troubleshooting
Adaptive Cruise Control – Information Messages - Vehicles With: Lane Centering Note: Depending on your vehicle options and instrument cluster type, not all messages display or are available. Note: The system could abbreviate or shorten certain messages depending upon which cluster type you ha ...