Kia Cee'd: Exterior care / Aluminum wheel maintenance
The aluminum wheels are coated with a clear protective finish.
- Do not use any abrasive cleaner, polishing compound, solvent, or wire brushes on aluminum wheels. They may scratch or damage the finish.
- Clean the wheel when it has cooled.
- Use only a mild soap or neutral detergent, and rinse thoroughly with water. Also, be sure to clean the wheels after driving on salted roads. This helps prevent corrosion.
- Avoid washing the wheels with highspeed car wash brushes.
- Do not use any alkaline or acid detergent. It may damage and corrode the aluminum wheels coated with a clear protective finish.
Underbody maintenance
Corrosive materials used for ice and
snow removal and dust control may collect
on the underbody. If these materials
are not removed, accelerated rusting can
occur on underbody parts such as th ...
Corrosion protection
Protecting your vehicle from corrosion
By using the most advanced design and
construction practices to combat corrosion,
we produce cars of the highest
quality. However, this is only part of th ...
Other information:
: Towing a Trailer Precautions. Trailer Brake Precautions
Towing a Trailer Precautions
WARNING: Do not exceed
the GVWR or the GAWR
specified on the certification
label.
WARNING: Towing trailers
beyond the maximum
recommended gross trailer
weight exceeds the limit of your
vehicle and could result in engine
damage, transmission damage,
structural da ...
Kia Cee'd JD Service Manual: Variable Intake Solenoid (VIS) Valve Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the VIS valve connector.
3.
Measure resistance between VIS valve terminals 1 and 2.
Specification: Refer to "Speci ...
