Kia Cee'd: Charging System / Alternator Specifications

Kia Cee'd JD Service Manual / Engine Electrical System / Charging System / Alternator Specifications

Specification

Alternator [Non-ISG type]

Item		Specification
Rated voltage		13.5V, 90A
Speed in use		1,000 ~ 18,000 rpm
Voltage regulator		IC Regulator built-in type
Regulator Setting Voltage	External mode	Refer to below graph
	Internal mode	14.55 ± 0.3V
Temperature Gradient	External mode	0 ± 3 mV / °C
	Internal mode	-3.5 ± 2mV / °C

※ Regulator Setting Voltage (External mode)

Alternator [ISG type]

Item		Specification
Rated voltage		13.5V, 110A
Speed in use		1,000 ~ 18,000 rpm
Voltage regulator		IC Regulator built-in type
Regulator Setting Voltage	External mode	Refer to below graph
	Internal mode	14.55 ± 0.3V
Temperature Gradient	External mode	0 ± 3 mV / °C
	Internal mode	-3.5 ± 2mV / °C

※ Regulator Setting Voltage (External mode)

Alternator Description and operation

Description The Alternator has eight built-in diodes, each rectifying AC current to DC current. Therefore, DC current appears at alternator "B" terminal. In additi ...

Alternator Components and components location

Components 1. OAD (Overrunning Alternator Decoupler) 2. Front Bracket 3. Front Bearing 4. Stator 5. Rotor 6. Rear Bearing 7. Rear ...

Other information:

Kia Cee'd JD Service Manual: Timing Chain Repair procedures
Removal 1. Turn the crankshaft pulley clockwise, and align its groove with the timing mark of the timing chain cover. 2. Remove the timing chain cover. (Refer to Timing System - "Timing Chain Cover") ...

Kia Cee'd JD Owners Manual: Static bending light
While driving the corner, for your sight and safety, the static bending light turns on automatically. The system will operate automatically as follows: When vehicle speed is under 10km/h and steering wheel angle approximately 80 degrees. When vehicle speed is over 10km/h and ste ...