Kia Cee'd: System operation / Air conditioning
Kia Air Conditioning Systems are filled
with environmentally friendly refrigerant*.
1. Start the engine. Push the air conditioning
button.
2. Set the mode to the position.
3. Set the air intake control to the outside
air or recirculated air position.
4. Adjust the fan speed control and temperature
control to maintain maximum
comfort.
CAUTION
- The refrigerant system should
only be serviced by trained and
certified technicians to insure
proper and safe operation.
- The refrigerant system should be
serviced in a well-ventilated place.
- The air conditioning evaporator
(cooling coil) shall never be
repaired or replaced with one
removed from a used or salvaged
vehicle and new replacement
MAC evaporators shall be certified
(and labeled) as meeting SAE
Standard J2842.
✽ NOTICE
- When using the air conditioning system,
monitor the temperature gauge
closely while driving up hills or in
heavy traffic when outside temperatures
are high. Air conditioning system
operation may cause engine overheating.
Continue to use the blower
fan but turn the air conditioning system
off if the temperature gauge indicates
engine overheating.
- When opening the windows in humid
weather air conditioning may create
water droplets inside the vehicle.
Since excessive water droplets may
cause damage to electrical equipment,
air conditioning should only be used
with the windows closed.
Air conditioning system operation tips
- If the vehicle has been parked in direct
sunlight during hot weather, open the
windows for a short time to let the hot
air inside the vehicle escape.
- Use air conditioning to reduce humidity
and moisture inside the vehicle on
rainy or humid days.
- During air conditioning system operation,
you may occasionally notice a slight
change in engine speed as the air conditioning
compressor cycles. This is a
normal system operation characteristic.
- Use the air conditioning system every
month only for a few minutes to ensure
maximum system performance.
- When using the air conditioning system,
you may notice clear water dripping
(or even puddling) on the ground
under the passenger side of the vehicle.
This is a normal system operation
characteristic.
- Operating the air conditioning system
in the recirculated air position provides
maximum cooling, however, continual
operation in this mode may cause the
air inside the vehicle to become stale.
- During cooling operation, you may
occasionally notice a misty air flow
because of rapid cooling and humid air
intake. This is a normal system operation
characteristic.
1. Set the mode to the position.
2. Set the air intake control to the outside
(fresh) air position.
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the ...
The climate control air filter installed
behind the glove box filters the dust or
other pollutants that come into the vehicle
from the outside through the heating
and air conditioning system ...