Kia Cee'd: Intake And Exhaust System / Air Cleaner Repair procedures

Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal.
3.
Remove the air duct and air cleaner assembly.
Tightening torque
Hose clamp bolt:
2.9 ~ 4.9N.m (0.3 ~ 0.5kgf.m, 2.2 ~ 3.6lb-ft)
Air cleaner assembly bolts:
3.9 ~ 5.9N.m (0.4 ~ 0.6kgf.m, 2.9 ~ 4.3lb-ft)
(1)
Remove the air duct(A).
(2)
Disconnect the breather hose (B) and air intake hose (C).
(3)
Remove the air cleaner assembly (D).

4.
Install in the reverse order of removal.
Air Cleaner Components and components location
Components   1. Air intake hose 2. Air cleaner cover 3. Air cleaner filter 4. Air cleaner body 5. Resonator 6. Air duct ...

Variable Intake Solenoid(VIS) Actuator Repair procedures
Removal and Installation 1. Disconnect the battery nagative terminal. 2. Disconnect the lever (A) and hose (B). 3. ...

Other information:

Kia Cee'd JD Service Manual: Flex Steering Repair procedures
Inspection 1. Check the audio remote control switch (A) for resistance between terminals in each switch position.   Switch Connector terminal Resistance (±5%) ...

Kia Cee'd JD Service Manual: Special service tools
Special Service Tools   Tool (Number and name) Illustration Use Crankshaft front oil seal installer (09455-21200) Installation of the front oil seal Valve stem oil seal install ...

© 2017-2022 www.kceed.com