Kia Cee'd: Engine Control System / Accelerator Position Sensor (APS) Specifications
Kia Cee'd JD Service Manual / Fuel System / Engine Control System / Accelerator Position Sensor (APS) Specifications
| Specification |
|
Accelerator Position |
Output Voltage (V) [Vref=5V] |
|
|
APS1 |
APS2 |
|
|
C.T |
0.7 ~ 0.8 |
0.29 ~ 0.46 |
|
W.O.T |
3.85 ~ 4.35 |
1.93 ~ 2.18 |
Accelerator Position Sensor (APS) Description and operation
Description
Accelerator Position Sensor (APS) is installed on the accelerator pedal module
and detects the rotation angle of the accelerator pedal. The APS is one of the
most imp ...
Accelerator Position Sensor (APS) Schematic diagrams
Circuit Diagram
...
Other information:
Kia Cee'd JD Service Manual: Vacuum Pump Repair procedures
Removal
Gamma 1.6 T-GDI
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the under covers (A).
Tightening torque:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ ...
Kia Cee'd JD Service Manual: Front Seat Shield Outer Cover Components and components location
Component Location
1. Front seat shield outer cover
...
© 2017-2024 www.kceed.com
