Kia Cee'd: Fuel Delivery System / Accelerator Pedal Repair procedures

Removal

1.	Turn the ignition switch OFF and disconnect the negative (-) battery cable.

2.	Disconnect the accelerator position sensor connector (A).

3.	Remove the installation bolt (B) and nuts (C), and then remove the accelerator pedal module.

Installation

Installation is reverse of removal.

Accelerator pedal module installation nut:

12.7 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11.6 lb-ft)

Accelerator pedal module installation bolt:

8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

Removal 1. Lift the vehicle. 2. Disconnect the fuel filler hose (A), leveling hose (B) and the ventilation hose (C). ...

Removal In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and inject ...

Kia Cee'd JD Service Manual: IMS (Integrated Memory System) module Repair procedures
Removal 1. Remove the negative (-) battery terminal. 2. Remove the driver seat in the car. (Refer to Body - "Front Seat Assembly") 3. Remove the IMS module (A) after loosening 3 screws i ...

Kia Cee'd JD Service Manual: Roller Blind Motor Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the roof trim assembly. (Refer to Body - "Roof Trim Assembly") 3. Disconnect the connector (A). 4 ...