Kia Cee'd: Troubleshooting / A/C Pressure Transducer Description and operation

The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed. Engine ECU stops the operation of the compressor when the temperature of refrigerant line is very high or very low irregularly to optimize air conditioning system.

Receiver-Drier Repair procedures

Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with a L wrench (A). ...

A/C Pressure Transducer Repair procedures

Inspection 1. Measure the pressure of high pressure line by measuring voltage output between terminal “1” and “2”. 2. ...

Other information:

Kia Cee'd JD Service Manual: Luggage Room Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the luggage lamp (A). 3. Disconnect the connector (B). 4. Remove th ...

Kia Cee'd JD Service Manual: TJ Joint Repair procedures
Replacement    • Special grease must be applied to the driveshaft joint. Do not substitute with another type of grease. • The boot ...