Kia Cee'd: Hands Free System / Troubleshooting

Kia Cee'd JD Service Manual / Body Electrical System / Hands Free System / Troubleshooting

Troubleshooting

Problem	Possible cause	Solution
Not pairing	Bluetooth device of Car is not discoverable mode	Enter Bluetooth pairing (searching) mode
	User’s phone is Bluetooth off mode	User’s phone set Bluetooth on
	Making an attempt pairing others bluetooth system	Check Bluetooth device name and address (12 word) to attempt paring Ex) 000B24FFF123
	Pass key error	Input the passkey displayed on the audio screen into the phone.
	5 phones have already been registered.	Delete paired phone list
	Bluetooth system cannot communicate with the phone.	Refer to IOP sheet ※IOP : Inter-operability
Not connection	User’s phone or Bluetooth device of Car dose not register Bluetooth device to connect	Retry pairing
Not connection	Bluetooth system cannot communicate with the phone.	Waiting 1minute then Retry connection or phone power off/on. Refer to IOP sheet
Not redial	User phone system issue	Push the 2 times Send button
Not accept call	User phone system issue	Refer to IOP sheet
Not dialing	User’s phone playing other menu (internet, mp3, game, etc..)	Stop other menu then set normal mode
Not dialing	Bluetooth system cannot communicate with the phone	Refer to IOP sheet

Description and operation

General Features • This audio system supports Bluetooth® hands-free and stereo-headset features. – HANDS-FREE feature:Making o ...

Hands Free Switch Schematic diagrams

Circuit Diagram Type A 1. Remote control switch(LH: Audio) 2. Remote control switch(RH: Cruise+Flex) 3. Bluetooth hands free switch ...

Other information:

Kia Cee'd JD Service Manual: Blower Resistor (Manual) Repair procedures
Inspection 1. Measure the resistance between the terminals. 2. If the measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor.) Replacement ...

Kia Cee'd JD Service Manual: Fuel Pump Motor Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the electric pump & sender wiring connector (A). 3. Remove the fuel feed tube (A) from ...