Kia Cee'd: Driving your vehicle / Trailer Towing

Kia Cee'd JD Owners Manual / Driving your vehicle / Trailer Towing

If you are considering towing with your vehicle, you should first check with your country's Department of Motor Vehicles to determine their legal requirements.

Since laws vary the requirements for towing trailers, cars, or other types of vehicles or apparatus may differ. We recommend that you ask an authorized Kia dealer.

WARNING - Towing a trailer

If you don't use the correct equipment and/or drive improperly, you can lose control when you pull a trailer. For example, if the trailer is too heavy, the brakes may not work well - or even at all. You and your passengers could be seriously or fatally injured. Pull a trailer only if you have followed all the steps in this chapter.

WARNING - Weight limits

Before towing, make sure the total trailer weight, GCW (gross combination weight), GVW (gross vehicle weight), GAW (gross axle weight ) and trailer tongue load are all within the limits.

WARNING

When you tow the trailer, make sure that you turn off the ISG function.

✽ NOTICE - For Europe

The technically permissible maximum load on the rear axle(s) may be exceeded by not more than 15 % and the technically permissible maximum laden mass of the vehicle may be exceeded by not more than 10 % or 100 kg (220.4 lbs), whichever value is lower. In this case, do not exceed 100 km/h (62.1 mph) for vehicle of category M1 or 80 km/h (49.7 mph) for vehicle of category N1.
When towing a trailer, the additional load imposed at the trailer coupling device may cause the rear tire maximum load ratings to be exceeded, but not by more than 15%. In such a case, do not exceed 100km/h, and the rear tire pressure should be at least 20 kPa(0.2 bar) above the tire pressure(s) as recommended for normal use (i.e. without a trailer attached).

CAUTION

Pulling a trailer improperly can damage your vehicle and result in costly repairs not covered by your warranty. To pull a trailer correctly, follow the advice in this chapter.

Your vehicle can tow a trailer. To identify what the vehicle trailering capacity is for your vehicle, you should read the information in “Weight of the trailer” that appears later in this chapter.

Remember that trailering is different than just driving your vehicle by itself. Trailering means changes in handling, durability, and fuel economy. Successful, safe trailering requires correct equipment, and it has to be used properly.

This chapter contains many time-tested, important trailering tips and safety rules. Many of these are important for your safety and that of your passengers. Please read this chapter carefully before you pull a trailer.

Load-pulling components such as the engine, transaxle, wheel assemblies, and tires are forced to work harder against the load of the added weight. The engine is required to operate at relatively higher speeds and under greater loads.This additional burden generates extra heat. The trailer also considerably adds wind resistance, increasing the pulling requirements.

Carry emergency equipment

Depending on the severity of the weather, you should carry appropriate emergency equipment. Some of the items you may want to carry include tire chains, tow straps or chains, flashlight, emerg ...

Hitches

It's important to have the correct hitch equipment. Crosswinds, large trucks going by, and rough roads are a few reasons why you’ll need the right hitch. Here are some rules to follow: ...

Other information:

: How Does Speed Sign Recognition Work. Speed Sign Recognition Precautions. Speed Sign Recognition Limitations
How Does Speed Sign Recognition Work Speed sign recognition uses a sensor behind the interior mirror to detect speed signs. If your vehicle has speed sign recognition with navigation, stored speed sign data may influence the indicated speed limit value. Speed Sign Recognition Precautions WARNIN ...

Kia Cee'd JD Owners Manual: Build in segmentation bar
Put both pillars (A) from the segmentation bar in the openings from the rail. To move the segmentation bar, put your hand on the side of the pillar and push down the lever arm (B). Make sure the pillars click into place. To release the belt, turn the upper element (C) to the lef ...