Kia Cee'd: Specifications & Consumer information / Tire specification and pressure label
The tires supplied on your new vehicle are chosen to provide the best performance for normal driving.
The tire label located on the driver's side center pillar gives the tire pressures recommended for your vehicle.
Vehicle certification label
The vehicle certification label attached
on the driver’s (or front passenger’s) side
center pillar gives the vehicle identification
number (VIN). ...
Engine number
■ Gasoline engine (Kappa)
■ Gasoline engine (Gamma)
■ Diesel engine
The engine number is stamped on the
engine block as shown in the drawing. ...
Other information:
Kia Cee'd JD Service Manual: Starter Components and components location
Components
1. Screw
2. Front housing
3. Stop ring
4. Stopper
5. Overunn clutch
6. Lever
7. Lever plate
8. Lever packing
9. Magnet switch assembly
10. Armature
assembly
11. Yoke assembly
12. Brush (-)
13. Bru ...
Kia Cee'd JD Service Manual: Rail Pressure Sensor (RPS) Description and operation
Description
Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the
instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor
element) built in the sensor converts the pressure to voltage signal. By using
this signal, the ECM ...
