Kia Cee'd: Tail Gate / Tail Gate Assembly Components and components location
Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Tail Gate / Tail Gate Assembly Components and components location
| Component Location |
| 1. Tail gate assembly |
Repair procedures
Adjustment
1.
After loosening the tail gate hinge (A) mounting bolt, adjust the tail
gate by moving it up or down, or right or left.
2.
...
Tail Gate Assembly Repair procedures
Replacement
•
Wear gloves to protect hands from injury.
...
Other information:
Kia Cee'd JD Service Manual: Repair procedures
Inspection
Lighting Switch Inspection
With the multifunction switch in each position, make sure that continuity exists
between the terminals below. If continuity is not as specified, replace the
multi-function switch.
Lighting Switch (Auto Light)
Lighting S ...
Kia Cee'd JD Service Manual: Intake Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the intake actuator connector.
3.
Verify that the intake actuator operates to the fresh position when
connecting 12V to terminal 4 and groundi ...
© 2017-2026 www.kceed.com
