Kia Cee'd: Ignition System / Spark Plug Specifications

Specification
 
Item
Specification
Type
SILZKR6810
Gap
0.9 ~ 1.0 mm (0.0354 ~ 0.0394 in.)

Spark Plug Description and operation
Description A spark plug is a device for delivering electric current from an ignition system to the combustion chamber of a spark-ignition engine to ignite the compressed fuel/ai ...

Spark Plug Repair procedures
Inspection [On vehicle inspection] 1. Accelerate the engine to about 3,000 rpm 3 times or more. 2. Remove the spark plug. ...

Other information:

: Pre-Collision Assist – Troubleshooting
Pre-Collision Assist – Information Messages Pre-Collision Assist – Frequently Asked Questions Camera Troubleshooting The windshield in front of the camera is dirty or obstructed. Clean the outside of the windshield in front of the camera. The windshield in front of the camera is clean, but t ...

Kia Cee'd JD Service Manual: Troubleshooting
Troubleshooting Ignition System   Symptom Suspect Area Remedy Engine will not start or is hard to start (Cranks OK) Ignition lock switch Inspect ignition lock switch, or replace as requ ...

© 2017-2026 www.kceed.com