Kia Cee'd: Body Control Module (BCM) / Repair procedures

Kia Cee'd JD Service Manual / Body Electrical System / Body Control Module (BCM) / Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the BCM unit (A) after loosening nuts.

Installation
1.
Install the BCM unit.
2.
Install the crash pad lower panel.
3.
Connect the negative (-) battery terminal.
BCM Diagnosis With GDS

1.
The body control module can diagnose by using the GDS more quickly.
The BCM communicates with the GDS and then reads the input/output value and drives the actuator.
2.
To diagnose the BCM function, select the menu of model and body control module.
3.
Select "Input/output monitoring", if you will check current data of body network system. It provides input/output status of each module.
–
BCM service data, CLU service data, SJB service data
4.
If you will check each module data operation forcefully, select "Actuation test".

5.
If you want to change user option, select “user option”.

Description and operation
Description CAN Communication Netrwork Function   Function Description Front Washer & Wiper – ...

IMS (Integrated Memory)
...

Other information:

Kia Cee'd JD Service Manual: Rear Wiper Motor Repair procedures
Inspection Rear Wiper Motor 1. Remove the 4P connector from the rear wiper motor. 2. Connect battery positive (+) and negative (-) cables to terminals 3 and 4 respectively. 3. Check that the motor ...

Kia Cee'd JD Owners Manual: Warning message
The message will appear when camera’s field of view is covered by some objects. The system stops until the field of view is normal. Check the windshield around the camera view area. If the system does not work normally even though camera’s field of view is cleared, we recommend t ...

© 2017-2025 www.kceed.com