Kia Cee'd: Interior Trim / Rear Shelf Side Trim Repair procedures

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Interior Trim / Rear Shelf Side Trim Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Folding the rear seat back assembly.

2.	Remove the rear shelf side trim mounting caps (B).

3.	After loosening the mounting bolts, then remove the rear shelf side trim (A).

Install in the reverse order of removal.

•	Replace any damaged clips.

Rear Shelf Side Trim Components and components location

Component Location 1. Rear shelf side trim ...

Rear Wheel House Trim Components and components location

Component Location [5Door] 1. Rear wheel house trim [3Door] 1. Rear wheel house trim ...

Other information:

: Blind Spot Information System Requirements. Switching Blind Spot Information System On and Off
Blind Spot Information System Requirements Blind spot information system turns on when all the following occur: You start your vehicle. You shift into drive (D). The vehicle speed is greater than 6 mph (10 km/h). Switching Blind Spot Information System On and Off To switch blind spot informa ...

Kia Cee'd JD Service Manual: Condenser Repair procedures
Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2. Check the condenser connections ...