Kia Cee'd: Rear Seat / Rear Seat Latch Repair procedures
[LH]
| • |
Put on gloves to protect your hands.
|
|
| • |
Use a plastic panel removal tool to remove interior trim pieces
to protect from marring the surface.
|
| • |
Take care not to bend or scratch the trim and panels.
|
|
| 1. |
Remove the rear seat back cover [LH].
(Refer to Rear Seat - "Rear Seat Back Cover")
|
| 2. |
After loosening the mounting bolts, then remove the rear seat latch
(A).
|
Tightening torque :
21.6 ~ 23.5 N.m (2.2 ~ 2.4 kgf.m, 15.9 ~ 17.4 lb-ft)
|
|
| 3. |
Install in the reverse order of removal.
| •
|
Replace any damage clips.
|
|
|
[RH]
| • |
Put on gloves to protect your hands.
|
|
| • |
Use a plastic panel removal tool to remove interior trim pieces
to protect from marring the surface.
|
| • |
Take care not to bend or scratch the trim and panels.
|
|
| 1. |
Remove the rear seat back cover [RH].
(Refer to Rear Seat - "Rear Seat Back Cover")
|
| 2. |
After loosening the mounting bolts, then remove the rear seat latch
(A).
|
Tightening torque :
21.6 ~ 23.5 N.m (2.2 ~ 2.4 kgf.m, 15.9 ~ 17.4 lb-ft)
|
|
| 3. |
Install in the reverse order of removal.
| •
|
Replace any damage clips.
|
|
|
Component Location
1. Rear seat latch [LH]
2. Rear seat latch [RH]
...
Other information:
Kia Cee'd JD Service Manual: Repair procedures
Inspection
Lighting Switch Inspection
With the multifunction switch in each position, make sure that continuity exists
between the terminals below. If continuity is not as specified, replace the
multi-function switch.
Lighting Switch (Auto Light)
Lighting S ...
Kia Cee'd JD Service Manual: Front Stabilizer Link Repair procedures
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) from front hub.
Tightening torque :
88.2 ...
Rear Seat Latch Components and components location
Front Seat Belt