Kia Cee'd: Rear Seat / Rear Back Armrest Repair procedures
| • |
Put on gloves to protect your hands.
|
|
| • |
Use a plastic panel removal tool to remove interior trim pieces
to protect from marring the surface.
|
| • |
Take care not to bend or scratch the trim and panels.
|
|
| 1. |
To remove the rear seat armrest :
| (1) |
Press the lock pin (A) and then push the rear seat armrest mounting
bracket (B) in the direction of the arrow in the below picture.
[LH]
|
| (2) |
First, remove the lock washer (A).
[RH]
|
| (3) |
Press the lock pin (A) and then push the rear seat armrest mounting
bracket (B) in the direction of the arrow in the below picture.
[RH]
|
|
| 2. |
Remove the rear seat armrest (A) by lifting the left side.
|
| 3. |
Install in the reverse order of removal.
| •
|
Replace any damage clips.
|
|
|
Component Location
[5Door, Waggon only]
1. Rear back armrest
...
Component Location
1. Rear seat latch [LH]
2. Rear seat latch [RH]
...
Other information:
Kia Cee'd JD Owners Manual: Multi fuse
If the multi fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery cable.
3. Remove the fuse panel on the right
side in the engine compartment.
4. Remove the nuts shown in the picture
above.
5. Replace the fuse with a new one of the
s ...
Kia Cee'd JD Owners Manual: Air bag non-inflation conditions
In certain low-speed collisions the air
bags may not deploy. The air bags are
designed not to deploy in such cases
because they may not provide benefits
beyond the protection of the seat belts
in such collisions.
Air bags are not designed to inflate in
rear collisions, ...
Rear Back Armrest Components and components location
Rear Seat Latch Components and components location