| Inspection |
| Power Seat Motor |
| 1. |
Remove the seat and all motor connectors.
|
| 2. |
With the battery connected directly to the motor terminals, check if
the motors run smoothly.
|
| 3. |
Reverse the connections and check that the motor rotates in reverse.
|
| 4. |
If there is an abnormality, replace the motors.
|
Components and components location
Power Seat Control Switch Schematic diagramsKia Cee'd JD Service Manual: Rear Assist Arm Repair procedures
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the rear wheel and tire (A) from rear hub.
Tightening torque:
88.2 ~ 1 ...
Kia Cee'd JD Service Manual: Engine Control Module (ECM) Repair procedures
Removal
When replacing the ECM, the vehicle equipped with the immobilizer must
be performed procedure as below.
[In the case of installing used ECM]
1) Perform "ECM Neutral mode" ...