Kia Cee'd: For 15, 16 inch tire / Notes on the safe use of the Tire Mobility Kit

Kia Cee'd JD Owners Manual / What to do in an emergency / If you have a flat tire (with Tire Mobility Kit) / For 15, 16 inch tire / Notes on the safe use of the Tire Mobility Kit

Park your car at the side of the road so that you can work with the Tire Mobility Kit away from moving traffic.
To be sure your vehicle will not move, even when you're on fairly level ground, always set your parking brake.
Only use the Tire Mobility Kit for sealing/inflation passenger car tires. Only punctured areas located within the tread region of the tire can be sealed using the tire mobility kit.
Do not use on motorcycles, bicycles or any other type of tires.
When the tire and wheel are damaged, do not use Tire Mobility Kit for your safety.
Use of the Tire Mobility Kit may not be effective for tire damage larger than approximately 6 mm (0.24 in). If the tire cannot be made roadworthy with the Tire Mobility Kit, we recommend that you contact an authorized Kia dealer.
Do not use the Tire Mobility Kit if a tire is severely damaged by driving run flat or with insufficient air pressure.
Do not remove any foreign objects such as nails or screws that have penetrated the tire.
Provided the car is outdoors, leave the engine running. Otherwise operating the compressor may eventually drain the car battery.
Never leave the Tire Mobility Kit unattended while it is being used.
Do not leave the compressor running for more than 10 min. at a time or it may overheat.
Do not use the Tire Mobility Kit if the ambient temperature is below - 30°C (-22°F).

Introduction

■ for 15 inch tire With the Tire Mobility Kit you stay mobile even after experiencing a tire puncture. The system of compressor and sealing compound effectively and comfortably seals mos ...

Components of the Tire Mobility Kit

1. Speed restriction label 2. Sealant bottle and label with speed restriction 3. Filling hose from sealant bottle to wheel 4. Connectors and cable for the battery direct connection 5. Hold ...

Other information:

Kia Cee'd JD Owners Manual: Operating condition
1.Place the light switch in the AUTO position. 2.Turn on the high beam by pushing the lever away from you. The high beam assist indicator will illuminate. 3.The High Beam Assist will turn on when vehicle speed is above 45km/h. 4. If the light switch is placed to the headlight position, t ...

: Replacement Parts Recommendation
We have built your vehicle to the highest standards using quality parts. We recommend that you demand the use of genuine Ford and Motorcraft parts whenever your vehicle requires scheduled maintenance or repair. You can clearly identify genuine Ford and Motorcraft parts by looking for the Ford ...