Kia Cee'd: Engine Control System / Manifold Absolute Pressure Sensor (MAPS) Specifications

Kia Cee'd JD Service Manual / Fuel System / Engine Control System / Manifold Absolute Pressure Sensor (MAPS) Specifications

Specification
 
Pressure
[kPa (kgf/cm², psi)]
Output Voltage (V)
20.0 (0.20, 2.9)
0.79
46.7 (0.47, 6.77)
1.84
101.3 (1.03, 14.7)
4.0

Manifold Absolute Pressure Sensor (MAPS) Description and operation
Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfer ...

Manifold Absolute Pressure Sensor (MAPS) Troubleshooting
Signal Waveform ...

Other information:

Kia Cee'd JD Owners Manual: Glow indicator (Diesel engine)
The indicator light illuminates when the ignition switch is placed at the ON position. The engine can be started after the preheat indicator light goes off. The illuminating time varies with the water temperature, air temperature and battery condition. ✽ NOTICE If the engine does n ...

Kia Cee'd JD Service Manual: Fuel Pressure Regulator Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the electric pump & sender wiring connector (A). 3. Remove the fuel feed tube (A) from ...

© 2017-2025 www.kceed.com