Inspection |
1. |
The ICM (Integrated Circuit Module) can be diagnosed by using the GDS
more quickly.
The BCM communicates with the GDS and then reads the relay value and
drives the actuator.
|
2. |
To diagnose the ICM relay function, select the menu of vehicle model
and body control module.
|
3. |
Select "Input/output monitoring", if you want to check current data
of body network system. It provides input/output status of each module.
|
4. |
If you will check each module data operation forcefully, select "Actuation
test".
|
Kia Cee'd JD Owners Manual: AUTO (Automatic) control
The rain sensor located on the upper end
of the windshield glass senses the
amount of rainfall and controls the wiping
cycle for the proper interval. The more it
rains, the faster the wiper operates.When
the rain stops, the wiper stops.
To vary the speed setting, turn the speed
contro ...
Kia Cee'd JD Owners Manual: Infant or small child
You should be aware of the specific
requirements in your country. Child
and/or infant seats must be properly
placed and installed in the rear seat. For
more information about the use of these
restraints, refer to “Child restraint system”
in this section.
WARNING
Every person in you ...