Removal |
1. |
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”)
|
2. |
Disconnect the electric pump & sender wiring connector (A).
|
3. |
Remove the fuel feed tube (A) from the fuel filter after releasing the
fixing clip (B).
|
4. |
Remove the plate assembly (C) after removing the cushion pipe fixing
hooks (D).
|
5. |
Disconnect the electric pump wiring connector (A) from the pump.
|
6. |
Remove the reservior cup (B) after releasing the fixing hooks (C).
|
7. |
Remove the fuel sender (A) with sliding it downward after releasing
the latch (B).
|
8. |
Remove the fuel pressure regulator assembly (A) after releasing the
cap (B) and return pipe (C).
|
Installation |
1. |
Installation is reserve of removal.
|
Kia Cee'd JD Service Manual: Rear Wheel Speed Sensor Repair procedures
Removal
1.
Remove the rear wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Remove the rear wheel speed sensor mounting bolt (A).
...
Kia Cee'd JD Service Manual: Crankshaft Position Sensor (CKPS) Description and operation
Description
Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one
of the most important sensors of the engine control system. If there is no CKPS
signal input, the engine may stop because of CKPS signal missing.
This sensor is installed in ladder fra ...