Kia Cee'd: Body Side Molding / Front Mud Guard Repair procedures

Replacement
  
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
  
Take care not to scratch the body surface.
1.
After loosening the mounting screws, then remove the front mud guard (A).

2.
Install in the reverse order of removal.
  
Replace any damaged clips.
Rear Wheel Guard Repair procedures
Replacement    • When prying with a flat-tip screwdriver, wrap it with protective ...

Rear Mud Guard Repair procedures
Replacement    • When prying with a flat-tip screwdriver, wrap it with protective ...

Other information:

Kia Cee'd JD Service Manual: Repair procedures
Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ...

Kia Cee'd JD Service Manual: Rear Seat Assembly Repair procedures
Replacement 1. After loosening the mounting bolts and then push it up and remove the rear seat cushion assembly (A). Tightening torque : 16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft) [5Door, ...

© 2017-2024 www.kceed.com